Axial expansion joint with rotating flange

Components: Bellows tube body (single-layer/multi-layer), connection end (flange/welded interface/threaded joint), protective sleeve (metal braided mesh/insulation layer), fixed bracket

Reinforced Double Sphere Rubber Expansion Joint

1. Small volume, light weight, good elasticity, easy to install and maintain. 2. It can produce lateral, axial, and angular displacement during installation, and is not restricted by the user's pipeline eccentricity or flange non-parallelism. 3. It can reduce structural transmission noise and has strong vibration absorption capacity during operation.

Axial expansion joint with smooth fixed flange

Components: Bellows tube body (single-layer/multi-layer), connection end (flange/welded interface/threaded joint), protective sleeve (metal braided mesh/insulation layer), fixed bracket

[PVC] Single Sphere PVC Flange Rubber Joint

TS pressure pipeline production license for the rubber joint industry, ISO9001-2015 international quality system certification, ISO1400:2004 environmental management system certification, OHSAS18001:2007 occupational health and safety management system certification, equipment type test certificate, etc.

Water plant 304 stainless steel rubber hose connector

304 stainless steel rubber joint is assembled from rubber sphere and stainless steel flange. The flange has good gloss, high temperature resistance, and corrosion resistance. It is widely used in engineering projects with high requirements. It is strictly forbidden to install the rubber expansion joint beyond the displacement limit during installation. When installing rubber joints on flat ground, in suspension, or vertically, the actual working axial displacement pressure of the rubber joint should be less than the supporting force of the pipeline; otherwise, an anti-pull-off device should be installed to prevent it from being pulled off under pressure during operation.

Galvanized flange flexible rubber joint

The main body of the rubber joint is composed of a rubber tube and a flange. Many customers believe that the most important part of the rubber joint is the rubber tube, but the flange on the rubber joint is also very important. The flange on the rubber joint is mainly used as the core equipment for connecting the rubber joint to pipelines and pumps. The rubber joint is due to its special material properties.

QT450 ductile iron flange rubber joint

It is ferritic nodular cast iron with high toughness and plasticity. At low temperatures, the toughness transforms to brittleness, but the low-temperature impact value is high, and it has certain resistance to temperature acute changes and corrosion resistance. It is widely used, in agricultural machinery for share ploughs, plough columns, differential housings, etc.; in general machinery as valve bodies, high and low-pressure cylinders, etc.; it can also be used for steel caps for power transmission lines, etc.

KFT type duct rubber flexible joint

According to the material requirements, the flexible joint of the air duct rubber can be divided into fiber fabric compensator, air duct rubber compensator, and stainless steel corrugated compensator (metal compensator). It has reasonable structure, good elasticity, large thermal expansion and contraction range, small reaction force to the pipeline support, and is equipped with metal short pipes and flanges at both ends to connect with the fan and air duct, which can compensate the thermal expansion of the air duct operation, and can also compensate multiple displacements.
< 1 >